Dropper cap series III, DIN18, tamper-evident, PP, black, ribbed with natural vertical dropper PELD 1.0 mm, type S-I
|Type of closure:||dropper caps|
|Glass capacity:||5 ml (1/6-oz), 10 ml (1/3-oz), 15 ml (1/2-oz), 20 ml (2/3-oz), 30 ml (1-oz), 50 ml (1 2/3-oz), 60 ml (2-oz), 100 ml (3 1/3-oz)|
|Old item code:||SVO-III-TSI-1.0-D18-E2-SW|
|Diameter (mm):||24.7 ±0.2|
|Height (mm):||21 +0.8/-0.3|
|Pcs / bag:||50|
|Pcs / box:||5000|
|Opening diameter (mm):||1.0|
This tamper-evident closure with the item code RGB02D2B002-200 belongs to the III series in the category dropper caps. A tamper-evident band or security ring serves as a tamper-resistant or tamper-evident function to a screw cap, lid, or closure. It is a plastic or metal structure around the circumference of the closure that is found attached below a closure in bottles, jars, and tubs. Tamper evident caps and tamper-evident closures give consumers confidence in the product you are producing by assuring that it's safe for use. Tamper-evident caps are the best way to have that assurance. If the seal or ratchet on a tamper-evident cap is broken, it indicates tampering. Tamper-evident lids also help to keep out contaminants that may end up in otherwise poorly sealed products during transport, storage, and display. The DIN18 thread is perfect for the Miron glass dropper bottles Orion 5 - 100 ml. Vertical droppers are used when the exact dosage is required. The vertical dropper is the dropper model that gives the most precise results. When a bottle is held at 180 degrees, the dropper has to be kept exactly vertically to start dropping, extremely exact drop volumes are produced with low tolerances, among the dosage aids. You can easily identify a vertical dropper by the “long” air pipe that is on the side of the component. The opening diameter of the dropper insert is 1 mm.
At Miron we offer a total packaging solution. We offer corresponding closures, like these vertical droppers, with our unique biophotonic Miron glass.
Select corresponding product